en
Options for drilling holes for a kitchen mixer, soap dispencer, pop-up button for automatic syphone and possible option for undermount installation
- Two holes by installation of a kitche mixer and soap dispencer
- Three holes by installation of a kitche mixer, soap dispencer and a third accessory
- No possibility for drilling hole for kitche mixer and soap dispencer
- drilled hole - Ø35
- Pre-drilled hole
If there is no option for hole chosen, the sink will be delivered without a drilled hole
Features of the FAT kitchen sinks
- Specific structure of the material that reduces the noise from the water falling in the bowl;
- High level of UV – resistance – the colors remain bright even by using the sink outdoor ;
- Specific structure of the surface coating with high resistance of aggressive chemicals /except abrasives/. The smooth and non-porous coating prevents the formation of stains and overlays and provides a quick and easy cleaning;
- Perfectly straight lines of the mounting surfaces;
- A deep bowl on all models;
- Pre-drilled holes for mixing battery or soap dispencer;
- A big variety of modells and colors;
- A high-level antibacterial protection due to the adding of silver ions to the material during the production.
- High scratch - and impact resistance by FATGRANIT material;
- Complectation with an /3 ½” siphon with overflow and a paper template for a presize cutting the montage hole on the countertop.
Installation of FAT Kitchen sinks
Models 241 to 245 are suitable for multi-functional installation - top installation, installation under the counter and flush with the counter. For this reason, the sink is equipped with two paper templates, each of which is marked for its purpose.
Mounting flush with the worktop:
- Outline and cut a hole in the tabletop using the appropriate template.
- Place the sink in the opening and draw a contour tightly around the board lying on the counter.
- Remove the sink and cut the countertop on the outside of the line (this way you add about 1 mm. distance to avoid damaging the sink when inserting it into the opening). It is necessary to form a step on which the sink stands on the same level as the counter.
- The height of the sink board is 7 mm. – for the depth of the step, consider this size and the type and amount of glue/sealant with which you will fix the sink.
Fatgranit sinks
Maintaining a granite sink is easy if it’s regularly cleaned.
The longer the stains stay on the sink, that harder it would be to get rid of them.
Here are some other advises from us for removing other pollutions, stains, colorizations or traces of metal objects:
Attention! While cleaning do not use aggressive chemicals that contain caustic soda, formic acid and others similar to that kind. Also do not use highly corrosive detergents – there is a risk of damaging the sink surface – decolorization or bleaching.
Instruction for drilling faucet holes:
- Remove the sink from the box, and place with face heading up, on a stabile surface.
- Faucet holes will be perforated before installing the sink into the kitchen worktop.
- Kitchen sinks FAT have pre fixed faucet holes. Choose the ones you prefer.
- With the sharp edge of a small hammer hit a few times only in the marked center.
- !!! Perforating the sink/knocking the marked center will take place only on the upper side surface (face of the sink).
- Continue knocking with light hits from center of the hole to the edge of it, until forming the final form of the hole.
- Leftover pieces of material/dust may be smoothed with sand paper, sand razor, or any appropriate abrasive.
- If, after perforating the faucet hole is wished re-packing and transporting the product, it is needed to clean the functional side of the sink
Included in set:
- Italian syphone Ø90 with overflow and additional connector for washing mashine/ dishwasher
- paper template for worktop cutting
- Certificates and instructions
The situation pictures are illustrative, the displayed accessories are not included in the complete set of the sinks.
